MavenRail Hybrid Feed
Roll gear and the rigid sheet conveyor run on the same chassis. Moving from facade mesh to a 30 mm composite panel does not need a second machine, a second operator or a second set of colour profiles.
1 / 1
%0
UV Hybrid Printers
Maven MH-3200 R12
Industrial speed at 3.2 metres, roll and rigid on one chassis
- Print Width
- 3200 mm
- Print Head
- Ricoh Gen6 (5 pl)
- Print Speed
- 92–111 m²/h @4
- Ink Channels
- CMYK · Lc · Lm · W
Price on request
01 — OVERVIEW
The MH-3200 R12 prints 3.2 m roll media and rigid sheets up to 30 mm on one industrial chassis. A Ricoh Gen6 array configurable from 2 to 20 heads delivers 92–111 m²/h at four passes; at eight passes it holds 41–49 m²/h and banding disappears entirely. Five-litre bulk supply per channel ends mid-shift ink changes on long building-wrap runs. The heavy-duty roll set carries reels up to two tonnes. A 15 kW, 70 A three-phase feed is mandatory.
DualCure LED Bridge
Water-cooled 395 nm lamps sit on both sides of the carriage, so the cure dose is identical in each direction. Unlike air-cooled lamps, temperature holds steady across a full shift — on a line running around the clock that is the single variable that decides LED service life.
TensionLock Roll Tension
Unwind and rewind motors take feedback from a tension sensor, holding constant pull as a two-tonne reel loses diameter. Across 3.2 metres, edge waviness is the most common cause of head strikes.
MavenFlow White Circulation
White ink circulates through the channel even when the machine is idle. Five litre tanks settle far faster than small bottles, which makes circulation an operating condition on this machine rather than an option.
AutoGap Height Sensor
Media height is measured automatically between 0 and 30 mm and the head gap is set from it. An anti-collision sensor halts the carriage on contact.
02 — TECHNICAL DATA
Specifications
| Mode | Pass | Speed |
|---|---|---|
| Production | 4 | 92–111 m²/h |
| Quality | 6 | 61–74 m²/h |
| High quality | 8 | 41–49 m²/h |
| Printing | |
|---|---|
| Print Width | 3200 mm |
| Max Media Width | 3300 mm |
| Max Media Height | 30 mm — in rigid sheet mode |
| Media Thickness | 1 mm — in roll mode |
| Max Roll Weight | 1,000–2,000 kg — with the heavy-duty roll set |
| Print Resolution | 726 · 1200 · 2400 dpi |
| Drop Volume | 5–15 pL |
| Printhead & Ink | |
| Print Head | Ricoh Gen6 (5 pl) |
| Head Count | 2–20 adet |
| Ink Channels | CMYK · Lc · Lm · W |
| Ink Type | UV LED |
| Ink Supply | 5 L toplu besleme, degazörlü; beyaz kanalda sürekli sirkülasyon |
| Ink Capacity | 5,000 ml |
| Ink Consumption | 10–30 ml/m2 |
| White Ink Circulation | yes |
| Mechanical | |
| Table / Bed | Vakumlu besleme köprüsü, 4 bölge |
| Vacuum Zones | 4 zones |
| Media Feed System | Rulodan ruloya açma-sarma + rijit levha giriş-çıkış konveyörü |
| Take-up System | Gergi sensörlü motorlu sarma, 3 inç göbek |
| Curing / Drying | Su soğutmalı LED-UV, 395 nm, araba iki yanında |
| Media Height Sensor | Otomatik malzeme yüksekliği ölçümü, 0–30 mm |
| Head Anti-Collision | Kafa çarpışma sensörü, otomatik duruş |
| Capping Station | Otomatik kafa koruma ve nemlendirme istasyonu |
| Head Cleaning | Otomatik püskürtme + programlı silme çevrimi |
| Power & Environment | |
| Power Supply | AC 220 V, 50/60 Hz, 3 faz |
| Power Consumption | 15 kW |
| Current | 70 A |
| Compressed Air | 6 bar, 250 L/dk |
| Operating Environment | 20–28 °C / %40–60 BN |
| Max Temperature Gradient | 10 °C/sa |
| Software & Connectivity | |
| RIP Software | ONYX · Caldera · SAi Flexi · Photoprint |
| Supported File Formats | PDF · TIFF · EPS · PS · JPEG |
| Interface | Gigabit Ethernet |
| Physical | |
| Dimensions (W × D × H) | 5950 × 1700 × 1600 mm |
| Weight | 2,985 kg |
| Required Floor Area | 34 m2 |
Compatible Substrates
- Vinyl
- Banner
- Mesh
- Wallcovering
- Canvas
- Foam PVC
- PVC
- Acrylic
- Aluminium Composite
- Foam Board
03 — INSTALLATION
Installation Requirements
We publish this before the sale. A machine that will not fit through the door, or a supply that cannot carry it, is the most expensive surprise there is.
- Power
- Three-phase (380 V)
- Floor area
- 34 m²
- Ceiling height
- 3.2 m
- Crated size
- 6250 × 1900 × 1850 mm
- Ventilation
- Not required
- Compressed air
- 6 bar, 250 L/dk
Not included in the price
- Freight and insurance
- Crane or heavy forklift unloading
- Electrical infrastructure and a 70 A three-phase panel
- Compressed air line and a compressor with a dryer
- Lifting equipment for heavy reels
- Starter consumables kit
04 — QUESTIONS
Frequently Asked Questions
What size of shop is the MH-3200 R12 right for?
Shops producing more than 100 m² of wide format a day — building wraps, mesh, tensioned banner and large panel work. Below that the machine idles through most of a shift, and the 1.8 m MH-1800 U4 lowers both the investment and the cost per square metre.
What moves the 92–111 m²/h figure?
Head count. The low end is a two-head machine, the high end twenty, and the curve between them is not linear. Konica KM1024i heads take four-pass output to 116–141 m²/h, but at eight passes both head families converge on 41–49 m²/h — the speed advantage is real only in the coarser modes.
Are three-phase power and compressed air mandatory?
Both are. The machine needs 220 V three-phase at 70 A; cable sizing and residual-current protection are your responsibility before installation. Compressed air must be 6 bar at 250 L/min and dried — moisture in the line goes straight into the ink system.
Do I actually need the heavy-duty roll option?
Only if you run reels above one tonne. Beyond the price, it obliges you to have a crane or a scissor roll lifter in the shop and a floor rated for the load. If your media comes on standard reels, skip it.
Can I add printheads later?
Yes — the chassis is prepared for twenty heads and taking an 8-head machine to 12 is an on-site upgrade. Colour profiles have to be rebuilt from scratch afterwards; running the old ones gives back the speed you bought as colour inconsistency.
Does the rigid capability replace a flatbed?
No. Sheet up to 30 mm passes through, but the machine carries it on a conveyor rather than holding it on a full vacuum bed. For bowed sheet, heavy material and ganged repeat work indexed off registration pins, the MF-3220 K12 is the right machine.