Zoned Vacuum Control
The bed is split into three independent zones, so a single 60 × 40 cm sheet does not require pulling vacuum across the whole table. Compressor load and power draw scale with the job, not the machine.
1 / 1
%0
UV Flatbed Printers
Maven MF-2513 R8
Industrial quality on any surface, uninterrupted output every shift
- Print Area
- 2500 × 1300 mm
- Print Head
- Ricoh Gen6 (5 pl)
- Print Speed
- 50–60 m²/h @4
- Ink Channels
- CMYK · Lc · Lm · W · Lak
Price on request
01 — OVERVIEW
The MF-2513 R8 is the volume machine of the category, built around a 2500 × 1300 mm bed. A Ricoh Gen6 array configurable from 2 to 12 heads delivers 50–60 m²/h at four passes, and three independent vacuum zones mean a single sheet costs no more vacuum than a full bed. The white channel circulates continuously, and water-cooled LED-UV curing holds lamp temperature steady in shops that run around the clock.
MavenFlow White Circulation
White ink circulates through the channel even when the machine is idle. Settled white pigment — and the head cleaning it causes — is the largest hidden cost in any shop running white.
AutoGap Height Sensor
Media height is measured automatically between 0 and 100 mm and the head gap is set from it. An anti-collision sensor halts the carriage on contact.
Water-Cooled LED-UV
Unlike air-cooled lamps, temperature stays constant across a full shift, which directly affects both cure consistency and LED service life.
02 — TECHNICAL DATA
Specifications
| Mode | Pass | Speed |
|---|---|---|
| Production | 4 | 50–60 m²/h |
| Quality | 6 | 36–42 m²/h |
| High quality | 8 | 27–30 m²/h |
| Printing | |
|---|---|
| Print Area | 2500 × 1300 mm |
| Max Media Height | 100 mm |
| Max Media Weight | 50 kg/m2 |
| Print Resolution | 600 · 900 · 1200 dpi |
| Drop Volume | 5–15 pL |
| Printhead & Ink | |
| Print Head | Ricoh Gen6 (5 pl) |
| Head Count | 2–12 adet |
| Ink Channels | CMYK · Lc · Lm · W · Lak |
| Ink Type | UV LED |
| Ink Supply | 2 L toplu besleme, beyaz sirkülasyonlu |
| Ink Capacity | 2,000 ml |
| Ink Consumption | 10–30 ml/m2 |
| White Ink Circulation | yes |
| Mechanical | |
| Table / Bed | Bölgesel vakumlu alüminyum tabla |
| Vacuum Zones | 3 zones |
| Curing / Drying | Su soğutmalı LED-UV, 395 nm |
| Media Height Sensor | Otomatik malzeme yüksekliği ölçümü, 0–100 mm |
| Head Anti-Collision | Kafa çarpışma sensörü, otomatik duruş |
| Capping Station | Otomatik kafa koruma ve nemlendirme istasyonu |
| Head Cleaning | Yarı otomatik püskürtme + manuel silme |
| Power & Environment | |
| Power Supply | AC 220 V, 50/60 Hz, 3 faz |
| Power Consumption | 10 kW |
| Current | 45 A |
| Operating Environment | 20–28 °C / %40–60 BN |
| Max Temperature Gradient | 10 °C/sa |
| Software & Connectivity | |
| RIP Software | ONYX · Caldera · SAi Flexi · Photoprint |
| Supported File Formats | PDF · TIFF · EPS · PS · JPEG |
| Interface | Gigabit Ethernet |
| Physical | |
| Dimensions (W × D × H) | 4400 × 2450 × 1250 mm |
| Weight | 1,510 kg |
| Required Floor Area | 28 m2 |
Compatible Substrates
- Glass
- Wood
- MDF
- Foam PVC
- PVC
- Acrylic
- Aluminium Composite
- Foam Board
- Metal
- Ceramic
03 — INSTALLATION
Installation Requirements
We publish this before the sale. A machine that will not fit through the door, or a supply that cannot carry it, is the most expensive surprise there is.
- Power
- Three-phase (380 V)
- Floor area
- 28 m²
- Ceiling height
- 3.2 m
- Crated size
- 4700 × 2600 × 1600 mm
- Ventilation
- Not required
- Compressed air
- 6 bar, 200 L/dk
Not included in the price
- Freight and insurance
- Forklift or crane unloading
- Electrical infrastructure and three-phase panel
- Compressed air line
- Starter consumables kit
04 — QUESTIONS
Frequently Asked Questions
What is the MF-2513 R8 the right machine for?
Shops printing more than 40 m² of rigid material a day — signage, sheet goods, glass and furniture panels. Below that volume the MF-1216 R4 fits better; if you need to print sheets up to 3200 × 2000 mm, look at the MF-3220 K12.
Can I add printheads later?
Yes. The chassis is prepared for up to 12 heads, and going from a 4-head to an 8-head configuration is an on-site upgrade. Colour profiles must be rebuilt afterwards.
Is three-phase power mandatory?
Yes — 220 V three-phase at 45 A. Bringing the panel to the machine and preparing residual-current protection is your responsibility before installation; we walk through it together during the pre-install survey.
How much white ink does it use?
With a fully opaque white underbase, total consumption approaches the top of the 10–30 ml/m² band. Also budget for speed: colour-white-colour work runs at roughly a third of single-pass colour output.
05 — SIMILAR